An array of new collateral for Kingspan

The Brief

We were asked to carry out a full re-brand of Kingspan current collateral to include vehicle graphics, stickers, engraved plaques, site signage, wayfinders, merchandise and more.

They were looking to update what they externally, and add a bit more life and colour internally.

What we did to help

We met on site with our contact at Kingspan to go through the brief and to see exactly what we would be replacing and creating, and we visited the areas that we would be working with internally.

We measured up and discussed colours, materials, and a variety of possibilities to get the best results.

We created, manufactured and installed:

An eye-catching external fascia with built up lettering
A stunning internal sign made of acrylic lettering for the reception area
Bespoke branded wallpaper
Wall art using a variety of material including fabric tension, acrylic panels and wall vinyls
Triangular acrylic and vinyl wayfinders
Merchandise including branded mugs and business cards
Bespoke artwork for the company vending machine
A vehicle wrap for a lorry
Branded blinds
One-way vision vinyl window graphics

It was a big job, but we did it! We are extremely pleased with the outcome.

Plaques with Stardust

The Brief

Following our work on the Friars Club exhibition in 2014, David Stopps from The Friars Club got in touch with us in regards to the unveiling of the David Bowie statue in Aylesbury. He required a series of graphics for the unveiling, and two permanent plaques – one as a dedication to David Bowie and the other attributed to the statues sculpturer.

What we did to help

We carried out an initial site visit with our client and discussed the brief further. We took the necessary measurements and gave advice on the type of product and material that would work best for this outdoor project.

We created two plaques made from thick acrylic, printed on the reverse side to protect the print fitted to the wall with aluminium barrel fixings They are installed by Impact, to meet a very tight deadline

We are very happy with the outcome of these plaques and believe they finish of the artistic piece just perfectly.

We’re also ecstatic to know that they have been seen around the world through the copious amounts of press the statue has received! We’re extremely proud to be mentioned on the plaque for our support in this project and our MD Andy Borrow even gets a personal mention!

Picture perfect panels for the ‘music club that rocked the world’!

On 1 March 2014, Bucks County Council launched a brand-new exhibition to celebrate the iconic Friars Club, based in Aylesbury.

The Friars Club was founded in 1969 and became universally acknowledged as the ‘music club that rocked the World’. It helped launch the early careers of artists such as David Bowie, Genesis, Mott the Hoople, Cockney Rebel, The Clash and more.

We were absolutely delighted to be part of this iconic event. It meant a lot to MD Andy Borrow, as he spent many nights at the Friars and must have seen over 50 bands play there!

The Brief

We were tasked to create photographic panels which included iconic images of artists taken at the Friars, which were on display throughout the exhibition.

What we did to help

We worked in conjunction with Bucks Country Museum and The Friars Club. We carried out an initial site visit with our contacts to discuss the exhibition and task further. We gave our expert advice and opinion on how we can create the boards and which materials to use, to make them not only look fantastic, but also give them longevity.

We did have to overcome some challenges with regards to the available photographs. As we were using original images, some of course were badly worn and others were too small to enlarge, which meant the quality wouldn’t as good and professional as we would expect it.

In conjunction with Lee Upton from Amberflare, we used many creative techniques, such as cloning parts of the images to ‘cover’ up creases, interpolation to increase the DPI, colour manipulation with greyscale, mid-tones and highlights, as well as using specialised Raster Image Processing software to help the transformation from small scans to large output prints.

We used Foamex, a lightweight, yet rigid material and created over 30 prints of varying sizes, as well as making 25 smaller signs free of charge to help promote the event.

We attended the evening event and were thanked in person for our support and hard work. The exhibition was a huge success. It was incredible to be part of this exhibition and bringing this iconic piece of history back to life.

New sign(ings) at Aylesbury RFC

The Brief

In 2016 Aylesbury RFC tasked us with creating and installing new interior and exterior signs for their recently refurbished club house. They also asked us to update the sponsors signs along the pitch perimeter.

What we did to help

In partnership with local company ''Mediaport'' We met with the General Manager to discuss the project and his requirements. As the club had undergone a refurb, the signs - from the moment guests enter the club gates, come into the club house and step onto the pitch - needed to complement its new look.

We carried out a site survey - taking measurements and photographs of the venue and the pitch.

We submitted product samples that we knew would work best for this project and would be long lasting.

We designed and manufactured the signs inhouse; and our team also installed them.

The external pitch perimeter boards were manufactured using Foamex. This is a versatile and cost-effective product, which is also strong, rigid, durable and water repellent.

As supporters and sponsors of Aylesbury RFC, they are always a great client to work for. We are extremely proud of the outcome. We feel that the signs have added to the enhanced look of the refurbed site and improved the pitch side dramatically.

Creating a Great Glass Elevator that is out of this world!

The Brief

Our brief on this occasion was to transform its lift into the infamous Great Glass Elevator from Charlie and the Chocolate Factory.

We were required to remove the current sweetie images from the lift and replace with the brand-new space graphics, both inside and outside.

What we did to help

We met with our client to discuss the brief, our ideas, products and other possibilities; plus carry out the necessary site surveys such as structure and installations. We also took precise measurements and a number of photographs to help us in the quotation and design process.

Our main objective was to make the whole customer experience convincing. We needed to ensure that every time a customer stepped into the lift, they felt like they were part of the story and getting ready to rocket ‘up and out’ of the roof!

To get this visual sensation the best products for us to use were vinyl panels and solvent inks, because of the range of translucency they had to offer.

We had to get the transparency of the print just right, so we carried out several tests. We stuck our test prints to the elevator’s glass sides and checked the amount of light that came through on dull and sunny days, at night, with the lights on and off etc. We needed to make sure it looked good from both inside looking out and outside looking in. This did take some time, but it was imperative we got this perfect.

We worked closely with external agency, Redman Partnership LLP, that supplied the final design. We superimposed the designs onto our photographs taken at the start of the project, to ensure they looked great and the final overall picture worked well. This part of the process helped our client visualise the final look and feel of images, fonts, positioning etc prior to print and manufacture.

Once our client was happy with the ‘splendiferous’ new look, it was time for the installation process.

It was an exciting project to be part of, but also very challenging.

We are very pleased with the outcome and believe this project has been highly successful. We have helped create a memorable window for all visitors to the Bucks County Museum and Roald Dahl Museum and Story Centre to admire.

Have you been in the Great Glass Elevator? What do you think?

‘Pulling together’ our design expertise for local Curtain business

The Brief

Having recently moved to a brand-new site, Curtains and Linens Ltd wanted a prestigious and eye-catching sign that would look great on the outside of their new premises.

What we did to help

We met the customer on site to discuss his requirements and we carried out a full site survey. We also took photographs of the building.

We do this so that we can superimpose logos/designs onto the photographs to ensure they look great and work in the space available on the building. This also helps clients visualise the final look and feel of images, fonts, positioning etc prior to print and manufacture.

Our in-house designer created a range of different logos based on what our customer wanted. These were superimposed onto the photographs, which helped our client choose his favourite design.

We were then able to go through product and material possibilities to ensure we got the desired result. Once all of this had been approved, we were able to move to the manufacture stage.

Between this stage and the sign installation, we supplied and fitted a temporary banner to advertise the company.

To get the prestigious looking sign that Curtains and Linen were after, we advised on the 10mm thick stainless-steel individual lettering and logo. Both of which were powder coated to the colours chosen by the customer.

Our client was unsure of what he wanted at first. We were able to give him some great honest advice and examples of professional signage that we’ve created during from our 25 years. He benefitted from this, along with the product samples and superimposed mock-ups.

We are very pleased with the outcome. It is a simple, yet impressive sign on a modern building.

Building positive communities with quality signs

The Brief

Following a rebrand, Watford Community Housing wanted to extend their fresh new look into their communities. They wanted to:

update all existing signs using a more prestigious and quality style
resolve the issue of vandalism and fading existing signs (created by another company)

What we did to help

As always, we started the process by meeting the client on site to go through the project and discuss their requirements.

As this was a large project at multiple locations, we carried out several surveys at each site to ensure we knew exactly which type of sign was needed where – for example building names, post mounted signs and directional/way finders. Every sites requirement was different.

We held several boardroom meetings to discuss the challenges of vandalism and fading signs. From our wealth of experience, we submitted products samples that we knew would work well.

We kept in touch with the client throughout this large project to ensure we were on track at all times.

During the project we had to be sensitive to residents needs and manage their expectations in terms of noise and privacy.

Anti-vandal signs were created for all neighbourhoods. This ensured that the signs remained looking as good as new for at least 10 years; and the issues of vandalism and fading signs disappeared.

The anti-vandal signs have a 10 year guarantee. Find out more here.

This was a fantastic project to be part of. It was a huge task, but we are extremely proud of the end result. Especially because of the great comments from the tenants themselves! The signs have really enhanced the neighbourhoods and also the quality of their brand.

Here are the BEFORE photographs:

Installing core values into the business

The Brief

Byrnes Dental Laboratory, based in Wheatley, Oxford, contacted us as they wanted the company’s core values installed on the walls of the lab. We only had a few days to complete this job as they were required for an in-house photo shoot.

What we did to help

Due to the quick turnaround we discussed all requirements and ideas over the phone. Once agreed, we created individually cut vinyl wall graphics for each core value, from the design supplied by Byrnes.

We provided a scaled layout and superimposed the graphics onto images of the various walls, to give the client an idea of the final look, size and position of graphics.

The installation was straightforward, and the graphics looked incredibly smart, making a real impact.

Vinyl graphics are durable, fade resistant and wipe cleanable. From bright bold designs to more subtle images, printed wallpaper and die cut vinyl graphics can add character and interest to any interior.

We were delighted to be able to turn this project around in just a few days.

The team at Impact Sign Solutions Ltd have been great to work with – from the moment I placed my enquiry, walking me through the process and measuring up, to the fitting day and after sales care. The service is prompt, friendly, and helpful.

Furthermore, I had a tight timeline to meet, and Daniela and Mark worked with me to help me achieve that deadline. The signage looks fantastic and I feel I have been delivered excellent value for money.

Very happy customer and I would highly recommend this team and company.

Alison Ho, Director

Quick turnaround for Grand re-opening

The Brief

The new owner of this canal side pub and restaurant got in touch with us regarding a re-brand.

He wanted to update the outside of the pub, focusing primarily on being seen by and enticing in passing traffic. He wanted a design that was clean and eye catching, and signs that complemented this new look.

We had only 2 weeks to install the news signs in time for the grand re-opening.

What we did to help

We met the owner to discuss all areas of the project and timescales.

As this had a short turnaround, we designed and manufactured the signs in-house. We also carried out a site survey to take exact measurements, and determine the best materials for the project. To keep costs down we re-used and revamped existing signs where possible.

To ensure a clean and fresh-looking logo on the outside wall, we advised using a wall wrap vinyl as opposed to hand painting, as it is a more economical option.

The logos on the exterior of the building are die cut vinyl graphics created by our in-house designer.

Other signs include a main fascia, wall mounted printed fascia, information poster mount and projection swing.

This was a challenging task to meet the timescale. But we did it!

It was great to work in such a lovely building.

Here are the BEFORE photographs...

Creating branding with impact for a new extension

The Brief

We were contacted by St Louis Catholic Primary School in Aylesbury, following their recent extension.

We were asked to create and install brand new signs for this new area, ensuring all branding was consistent throughout.

Signs requirements included fascia (individual letters and logo), post mounted, car park, wayfinding, interior plaques, window graphics - everything!

The work had to be carried out during the school summer holiday, giving us roughly six weeks.

What we did to help

As always, we started the process by meeting the client on site to go through the project. We discussed their requirements, our ideas, materials and other possibilities.

We carried out the necessary site surveys such as structure, installations and risk assessments. We also took precise measurements and numerous photographs to help us in the quotation and design process.

As there were so many elements to this project, we regularly visited the site and held numerous meetings with the client to ensure we were continually on brief.

We used a variety of products for this project.

For the external signs we used individual letters and the school logo, cut from aluminium complete with a 10-year anti-vandal resin. We fitted these with rear locators so that the fixings cannot be seen.

It came to our attention that the client had received a quote by a competitor for signs in an alternative material. With our expertise and knowledge, we knew that this would not have looked as clean and professional as the material we used.

We are essentially here to give clients expert advice on what would work best for their project. It was a very satisfying job with superb results and a very happy customer.

They were extremely content knowing that they had chosen the right product and it will look as good as new in ten years.

Bespoke drywipe boards for Wipac

New year, new look!

Skilled installation for Aylesbury Automation

The Brief

In 2017 we were asked to refresh their fascia signage ensuring it stayed consistent with their corporate branding.

This involved removing their existing tired fascia signs, refurbishing two of these and installing a brand-new option.

What we did to help

We had a site visit to meet the client and discuss in detail what is required. We will always give our expert opinion on what steps we believe need to be taken to get the desired, and best, outcome.

We carry out various surveys, including structural and installation, and we take a range of measurements. We also take photographs of the area we will be working on so that we can superimpose artwork designs onto the photograph, so the client can get an idea of what the final product will look like.

For this project we advised that using individual lettering would enhance the building’s appearance. We offered a range of sample material options and colour swatches and took them through all possibilities.

When the final decision was made, we superimposed the finished artwork, completed by our in-house designer, onto the photograph of the front of the building. Aylesbury Automation went ahead with this classic look and chose the flat cut acrylic lettering in superior high gloss finish.

The individual letters were expertly installed by our Production Manager, Mark. All individual lettering is attached using rear fixings, which are hidden from view. There are no screws to distract from the design, smooth sheen and rich colour. Due to the cladding on the outside of the building, the letters had to fit into its high and low points, to ensure all letters remain flat and levelled. This is a certainly a skilled craft!

We are very pleased with the result. It was a truly satisfying job from our point of view. Taking away a tired, dated and disjointed sign and replacing it with a clean, eye catching and professional one; enabled us to dramatically improve the whole look and feel of the building.

Gold-seal of approval

The Brief

Goldseal Conservatories Ltd contacted us as they were moving premises and needed new signage for their showroom and new company van graphics.

What we did to help

We met the client onsite at the new premises to go through their requirements and discuss our ideas and the best products for the project.

Once the proposal was approved, we created various designs for the signs using their corporate colours of black and mirror finish gold.

We superimposed each design onto a photograph of the showroom, taken at the onsite meeting. This allowed the client to get an idea of how each sign would look when it was installed. It also made the selection process easier.

We also provided samples to show the quality of each product we recommended.

We wrapped the vans over the weekends and part into the weekday, so they weren't off the road for too long.

It was great to be part of this project and to work alongside Goldseal again.

The signs give the showroom that little bit extra to make it welcoming for when customers visit. Plus, their vans look extremely prestigious and professional, and are a great form of mobile advertising!

Keeping customers safe

The Brief

Kingspan contacted us as they required a range of COVID-19 signage from our online shop, which informs clients, staff and delivery drivers of the updated procedure at their site.

What we did to help

We visited the client onsite to discuss the project straight away as we understood the urgency.

We created some brand-new information signs and created new messaging that would be installed on existing signage. The new messaging would lie over the top of grey back self-adhesive vinyl, so the previous graphics would not show through.

We set to work immediately and provided superimposed images to show how the final artwork would look.

From the quotation stage to designed, manufacture and installation, it took just 2 working days.

We are very pleased that we were able to help Kingspan with this project. By acting quickly, we both were able to get key safety measures in place within a matter of days.

Collateral that’s a cut above the rest!

The Brief

Oak Garden Machinery contacted us as they were attending an exhibition and required eye catching exhibition graphics and promotional items.

What we did to help

After meeting the customer to find out the full extent of their exhibition wish list, we designed and produced a range of collateral including:

Exhibition Banners - using material that can be easily rolled, stored and transported and still look great at the final destination;
Embroidered clothing;
Printed mugs;
Coasters; and
Notepads.

We also powder coated barrels in corporate colours, adding die cut lettering, which looked excellent and really stood out.

We produced samples of each item to make sure the logo’s colours were correct and matched. This is an important part of the process, as colour consistency across every piece of collateral is key.

This was a great project to be part of, with many different elements to create and pull together in time for the event. We especially enjoyed creating the final look of the barrel. We’re really pleased with the end result.

Lifting moral with colourful vinyl

The Brief

Watford Community Housing contacted us as they wanted to add some vibrancy and life to the lifts at their head office by incorporating welcoming images of their residents and their rebranded logo.

What we did to help

We met with the client on site to discuss the project further and inspect and measure the space that we’d be working with.

We discussed a variety of possibilities and advised that the most suitable product for a heavily used area would be self-adhesive vinyl graphics.

We provided a small sample of one of the layouts for client approval to ensure they were happy with the colours and finish.

Once signed off, we digitally printed and expertly installed the graphics on the lift doors. The installation took place out of hours, as the lift doors had to be kept shut at all times!

The images the client provided were fresh and bright, which added that pop of colour making them very eye-catching. This imagery certainly helped produce a fantastic result.

Self-adhesive vinyl provides a great print finish and is extremely durable and versatile, allowing it to be used on a variety of products and surfaces. It is also extremely cost effective.

We really enjoy this type of project where we initially see a dull, blank canvas and then turn it into something bright and fun. Plus, as we used imagery of the Watford Community Housing’s residents, it made the project quite personal to the client. We are very pleased with the outcome.

First impressions to put a smile on your face

The Brief

Temple Square Dental, based in the centre of Aylesbury, asked us to help update their ‘old and tired’ branding, and make it consistent with their new corporate branding.

What we did to help

We carried out a site visit to find out more about the project and discuss possible ideas and products that would give the best result.

Once approved, we produced and installed a directory sign, window graphics, internal Acrylic plaques along with an illuminated reception logo.

We gave advice on the different lighting options to make sure the logo was illuminated as much as possible. We also provided product samples to ensure we got the corporate colours and specification correct.

The installation took place with minimal disruption to patients, which was paramount.

This was an exciting project to be part of. The signs immediately smartened up the look of the newly decorated surgery.

A tea room with a new view

The Brief

The Tea Room wanted to install a transparent barrier on the counter top that would protect staff, customers and the food items, but still make the room look inviting.

What we did to help

We carried out a site visit to speak to the client and find out what they wanted to achieve. We provided expert advice as to which products would work best for their project, took photographs of the area we would be working with and measured up.

We advised they use an framed acrylic screen that fits directly to the counter to keep the area looking clean and tidy, at the same time as displaying freshly prepared food. It was important to us to make a screen that fitted right in with the Tea Room and wouldn’t look out of place.

We created a range of 3D drawings and superimposed them onto photographs taken at our site visit. This gave the client an idea of what the final product would look like and helped with the approval process.

The screen was roughly 5m long and 80cm tall and we manufactured this in-house.

As we carry large stocks of this product, manufacturing the item in-house enables us to complete and install within a very tight timescale.

We are very pleased with the overall look and feel.

It’s a wrap!

The Brief

Chambers Engineering contacted us as they needed a customer’s vehicle wrapped. We were asked to transform a white lorry cab to a bold blue.

What we did to help

We inspected the vehicle first to check the contours and coverage. This is to ensure we used the correct vinylto give it that excellent finish. We used 3M vehicle wrap vinyl.

The company logos (Quereus) were sign written separately and added onto the side of the cab, wind defender and back doors. We produced various samples to make sure we got the corporate colours exact and the customer was happy with it. It is extremely important to get this right, because if we don’t, it affects our clients company identity.

To get an expert, clean and high-quality finish, this job had to be carried out in a dust free environment. We completed the work on site at Chambers Engineering.

We used 3M vehicle wrap vinyl. It fits the vehicle like a second skin and moulds within the contours allowing it to be used on the shaped wind defender.

This product is extremely versatile. Not only does the vinyl add a protective layer to your paintwork, it can also be removed without damaging it. It comes with a 3-year manufacturer’s warranty.

Customers go crackers for new fascia sign!

The Brief

The shop has been in Parton Road, Aylesbury for over 15 years. The owner wanted to spruce up the shops external appearance and change the fascia from a failing fluorescent tube sign, to an up to date illuminated one.

What we did to help

We met with the owner on site to discuss what he was looking for.

We carried out the usual site surveys, took measurements and photographs, so that we could superimpose sign designs at a later stage of the process. We discussed all possibilities in terms of the right product for the desired result.

We then submitted various design options that our inhouse designer created. We wanted to ensure we gave our customer a good selection of designs in colours that suited a Chinese take-away.

We went through a number of samples and colour swatches with the owner; and he even called in to see us at our unit on Rabans Close.

During the installation process, when we removed the existing sign, parts of the building structure underneath were rotten. This needed repairing and weather proofing desperately. We carried this out on behalf of our customer before installing the brand-new fascia.

We used an aluminium fascia to give a clean and prestigious look. This material is very long lasting, and the sign is much more economical to run due to the LED lighting.

We are incredibly proud to transform a shop from having an appearance that’s old and outdated, to smart and eye catching.

The shop's image has improved dramatically, and the customers have noticed.

Here are some before, during and after photographs. I'm sure you can see there's a huge difference!

No longer getting lost at Woodrow High!

The Brief

Evie from Woodrow High House in Amersham needed our help as the pupils, staff and visitors were finding it difficult to navigate around the school. What they needed was wayfinding signs and we were the right people to help!

What we did to help

Andy our MD went to Woodrow to measure the internal areas that required signs and showed examples of different materials that we would recommend. They were also looking to update their entrance sign, so it looked more welcoming, eye-catching and colourful and a cark park sign to make it easier to navigate.

The end decision for the internal signs was to go for Acrylic plaques. The plaques were laser cut and directly printed in-house, using their corporate colours, making sure they had a modern look to them. Printed on the rear, ink could not be removed or ruined with cleaning or being picked off. Once ready we sent along our skilled fitters to the school to fit all the plaques for them.

New signs for a new logo

The Brief

Phil from Fremantle Trust contacted us as they had just refreshed their logo and were looking for replacement signs for various care homes within their Trust.

We were only too happy to help!

What we did to help

We went along to the various locations around the Bucks area to measure the existing signs. All the signs were made in-house, printed on our large format flatbed printer. The UV durability makes it perfect for outdoor use! We also had to make sure all the new signs were within their corporate guidelines.

Our Installation Manager Mark went along to all the sites to fit the post and wall mounted signs for them.

Putting their Trust in us

The Brief

The Trust wanted to enhance the safety measures within their reception area and customer meeting rooms, by installing larger protective screens that wrapped around the reception desk and created a Covid 19 protective barrier in the meeting room.

What we did to help

We carried out a site visit to find out more about the project, provide expert advice as to which products would work best, take photographs of the areas we would be working with and measure up.

Due to the size of the reception desk and the glass panelling already installed, we had to create a bespoke screen that could fit easily and safely to the existing glass and still make the waiting area look welcoming and professional. We wanted to ensure that nothing detracted from the Trust’s brand, and if anything, enhance it.

The three customer meeting rooms also required bespoke acrylic panelling, which were installed over the desks fitting snuggly in between the walls either side.

We created 3D drawings and various versions of the new screens for approval. We also superimposed our drawings onto the photographs taken at our site visit, to give the client an idea of what the final product would look like. Once approved, we set to work with the installation.

We worked closely with the Trust’s Facilities Co-ordinator throughout the design, creation, and installation process to ensure they were happy with every aspect of our work. This helped the project move along quickly and efficiently.

Since installation, the client has asked us to extend the height, and also brand the bottom panels. This can easily be carried out as it is a modular system.

Never a poor reception at Mix96

The Brief

Mix96 contacted us as the wanted to freshen up their main entrance and add their core values to their office wall to make them visible for team members.

What we did to help

After carrying out a site visit and meeting the client to discuss the job further, we agreed that the best way forward was to use wallpaper graphics and die cut lettering.

Wallpaper graphics give different textures and finishes which enables you to customise almost any wall. These graphics are digitally printed with high resolution images allowing you to create dramatic, large scale floor to ceiling visuals, which we needed for this job as we had an exceptionally large wall to cover! It is durable, fade resistant and wipe cleanable, plus extremely cost effective.

We produced a range of samples for both parts of the job, to firstly show the quality of the product and secondly to ensure the finished colours looked great.

Once approved we printed the wallpaper and lettering, & carried out the installation. The area now looks vibrant and welcoming - just like Mix96!

We enjoyed this job as a great part of our work is seeing the before and after transformation. Wallpaper is a quick and easy way to change a dull area into something bright and vibrant. Updating such a large space made a massive impact.

Celebrating a 20th birthday with a rebrand!

The Brief

Last year, Alcom IT turned 20. To celebrate the occasion, they underwent an exciting rebrand to better reflect the range and quality of their services, 20 years on.

We were brought in to assist with the revamp and were tasked with creating a range of items and merchandise.

We had under 8 weeks to complete the project in time for the big unveiling at the beginning of April 2019.

What we did to help

We worked closely and met regularly with Alcom IT to design, manufacture and install a variety of products including:

A new fascia sign for the front of the building. This sign consisted of an aluminium tray panel with individually cut Acrylic letters.
A complete van wrap. Here we wrapped a pure white van to make it Alcom IT orange. We also created hub cap graphics.
Embroidered clothing and personalised mugs, for the whole team.
Internal window graphics.
New pavement signs.

We provided colour swatches to ensure the new corporate orange colour remained consistent throughout each of the items manufacturing processes. It was imperative we got this right.

We produced the layouts for the various items, which included superimposing the logo/fascia onto images of where they would be printed/installed. This helped the client visualise the final look and feel of images, fonts, positioning etc prior to manufacture.

From the very first moment we started dealing with Impact Signs it was clear they are all very knowledgeable and passionate.

We usually supply our own artwork but have no clue about technical aspects of sign work so it was great to have Andy, Daniela and the rest of the team help advise us along the way on how to get the best from our designs into stunning reality. They really feel like a part of our team.

Thank you, Impact Signs – you’ve made our re-brand a breeze!

Abe AlmosawiManaging Director of Alcom IT

An array of new collateral for Kingspan

The Brief

What we did to help

Other products we have made for this customer

Gallery image title 05

Gallery image title 06

The Brief

What we did to help

Other products we have made for this customer

Gallery image title 05

Gallery image title 06

The Brief

What we did to help

Other products we have made for this customer

Gallery image title 05

Gallery image title 06

The Brief

What we did to help

Other products we have made for this customer

Gallery image title 05

Gallery image title 06

Gallery image title 06

Gallery image title 06

Gallery image title 06

The Brief

What we did to help

Other products we have made for this customer

The Brief

What we did to help

Other products we have made for this customer

The Brief

What we did to help

After

After

After

After

After

After

After

After

After

After

After

After

After

After

After

After

After

After

After

After

After

After

After

After

Other products we have made for this customer

Gallery image title 05

Gallery image title 06

Gallery image title 06

Gallery image title 06

Gallery image title 06

The Brief

What we did to help

Other products we have made for this customer

The Brief

What we did to help