Very wide colour range – can be powder coated to any standard Ral colour. Shatter proof, will not rust, rot or corrode. Superior UV resistance. As flat cut but with ‘built up’ sides (returns) resulting in a 3D letter or logo. The letters can also be ‘halo’ illuminated. Most fonts and lo

Why Choose Built-up Aluminium Letters?

Aluminium is a slightly more expensive option than Perspex, yet because it can be powder coated in any RAL colour it offers a greater range of colour finishes.

Our built up letters are created by adding sides to a flat cut letter in order to create a 3D effect. As with Perspex, aluminium doesn’t rust, rot or corrode and is suitable for indoor and outdoor applications. The advantage of aluminium is that Impact Signs can coat it in high quality matt, satin or gloss finishes in an extensive range of colours to match the colour and style of your corporate image.

Impact Signs have installed built up aluminium lettering on shop fronts, galleries, as projecting signs and even on our own premises! They are also suitable for interior walls. Either way, we always install letters using hidden rear fixings, for a quality finish.

Without any need for maintenance, built up aluminium letters look as impressive after years on the outside of a building, as they did on the day they were installed.

If you are interested in finding out more about the colour and style possibilities, speak to one of Impact’s experienced team.

(inc. VAT)

Not quite sure what you want?

We’re more than happy to discuss your requirements and provide advice without obligation. Simply select your preferred method to get in touch.

Process

It's as easy as 123

Let’s get started with your Ideas, the more detail you provide the better!
We’ll email or phone you to talk it through, give advice and provide a quote.
It’s then over to us to create and amend artwork and you to pay the deposit.
If you provide the artwork, we’ll pre-flight check it for you and you pay the deposit
With your approval, we’ll get cracking on with the production.
We’ll soon be back in touch to arrange fitting/delivery/collection.
We will never proceed with production until you are entirely happy with the artwork and will always provide a proof (unless the artwork is supplied by you).

Colour Swatches

This product is available in the following colours.

All aluminium letters are powder coated to standard ral colours as below.

Disclaimer: Although every effort has been made to display the colour swatches shown as true, all monitors are not consistent in colour representation, the swatches therefore should be taken only as a guide!

Maintenance

Care of your new rigid letters

Congratulations, you have just bought ‘the best’. Impact Signs use ‘new generation’ materials for all of their fascia signs. Everything that we use is…

  • UV stable (fade resistant).
  • Waterproof.
  • Rot proof
  • Virtually maintenance free.
  • All you have to do is clean with soapy water and a sponge as required. That’s it!

Lighting

Add Lighting and Get Noticed

Enhances any sign and gives higher visibility especially at night.

With an attractive curved profile housing a unique polished aluminium reflector, it is the answer for a constant run illumination of signs, fascias, pelmets and skirtings. Adjustable stand-off brackets allow accurate adjustment of light throw of signs up to 3000mm depth. The aluminium body is available in silver anodised and powder coated white finish. Sections can be butt-jointed with available adaptors.

Features & Benefits: Powder coated white or black as standard but can be to any RAL colour, waterproof, rot proof, maintenance free (tubes are easily changed).

DIY

  1. When we supply you with individual cut letters, we also supply a “Fixing Layout” made from craft paper, showing the drawn round letters (in a layout) with the “Fixing” points marked with an “X”, this is indicated at the top of the page, - X marks the spot!
  2. You place the “Layout” at the required position on the fascia and drill where the “X’s” are!
  3. The female cap is then screwed into the fascia (Giving the screw half a turn back to allow the cup to swivel and screw down)
  4. Push the letter into the cups until and audible click is heard if using nylon fittings, for metal letters using brass fixings screw down the cap until it is tight.

It’s as easy as that!

Note: for metal letters, we would use brass screw type locators, exactly the same fixing method as above but instead of ‘snapping’ in place you simply screw the nut to to the thread on the letter.

Video

https://youtu.be/4D0vT-lJoB4

https://youtu.be/olzae2DECAA

Testimonials

Hi Andy, Wow that’s brilliant! Thanks very, very much

Paddy GreenPremier Plastic Parts

You are friendly and helpful, reliable and reasonably priced. To be honest I’ve found all of the staff at Impact to be helpful and friendly, I’ve had a couple of orders that I haven’t given Patrick much time to fill but he always manages to get the job done

Lisa EdwardsAVDC

Click here to read impartial, anonymous reviews vetted by THE Trading Standards