A cross between a flat panel and a tray panel, the frame raises a flat panel, giving it depth and overcomes the age old problem of screwing through the face of the sign.
Why Choose Tray-X Signs?
Tray-x utilises all the great attributes of a flat Alupanel, but gives it depth by adding a unique contemporary frame.
The ‘’new kid on the block’’ is proving to be very popular, a simple but effective modular framing system that gives flat panels the appearance of a tray. A great economical in-between option which has more depth and has no visible screws. Also available in a double sided format so that your projecting signs can match your fascia signs!, available as standard in silver anodised or white, but can also be powder coated to a colour of your choice.
Ideal for fascia signs and other outdoor applications and often used for interior signs where an extra dimension is required. Typical applications include restaurants, factories, shops, garden centres, schools, industrial units, corporate buildings and offices.
Tray-x signs are a popular choice for temporary signs, or when your budget is limited. As a popular product, Impact Signs have considerable experience in producing Foamex fascia signs for many businesses in and around Aylesbury.
Not quite sure what you want?
We’re more than happy to discuss your requirements and provide advice without obligation. Simply select your preferred method to get in touch.
Let’s get started with your Ideas, the more detail you provide the better!
We’ll email or phone you to talk it through, give advice and provide a quote.
It’s then over to us to create and amend artwork and you to pay the deposit.
If you provide the artwork, we’ll pre-flight check it for you and you pay the deposit
With your approval, we’ll get cracking on with the production.
We’ll soon be back in touch to arrange fitting/delivery/collection.
We will never proceed with production until you are entirely happy with the artwork and will always provide a proof (unless the artwork is supplied by you).
Colour Swatches (RAL)
Substrate (background panel) colour swatch below. For sign writing colours, please see ‘Sign Writing Methods’ tab.
Disclaimer: Although every effort has been made to display the colour swatches shown as true, all monitors are not consistent in colour representation, the swatches therefore should be taken only as a guide!
Sign Writing Methods
Flat Cut – Perspex
Flat Cut – Alupanel
Flat Cut – Aluminium
Disclaimer: Although every effort has been made to display the colour swatches shown as true, all monitors are not consistant in colour representation, the swatches therefore should be taken only as a guide!
Add Lighting and Get Noticed
Enhances any sign and gives higher visibility especially at night.
With an attractive curved profile housing a unique polished aluminium reflector, it is the answer for a constant run illumination of signs, fascias, pelmets and skirtings. Adjustable stand-off brackets allow accurate adjustment of light throw of signs up to 3000mm depth. The aluminium body is available in silver anodised and powder coated white finish. Sections can be butt-jointed with available adaptors.
Features & Benefits: Powder coated white or black as standard but can be to any RAL colour, waterproof, rot proof, maintenance free (tubes are easily changed).
Care of your new fascia Sign
Congratulations, you have just bought ‘the best’. Impact Signs use ‘new generation’ materials for all of their fascia signs. Everything that we use is…
UV stable (fade resistant).
Virtually maintenance free.
All you have to do is clean with soapy water and a sponge as required. That’s it!
If you wish to remove the sign writing (vinyl only) at any stage, this is relatively easy to do, just use the following guidelines:
Use heat! Vinyl can be removed easier when it is warm. A hair dryer is the best tool for the job. Caution! Do not use hot air guns, these may burn the fascia!
To remove the glue residue use white spirit. Let it soak in for approx 2 minutes first, glue should then be easy to use.
Do not use a knife to remove vinyl, a plastic knife is best, or ask us for a squeegee.
Dear Andy as I said to Mark yesterday, there are probably companies locally that supply and fit external signage however, it was important to us that we got this right especially when you consider that we are now part of a bigger company and this is their family logo. This is why I placed the order with Impact Signs.
From our initial contact right through to completion, I had complete peace of mind. It was also nice for me to have colleagues comment on how good it all looked so it was only fair to pass the pat on the back onto you.
Chris SimmonsGC Rieber
Thank you very much, really appreciate it. The service was good and the quality of the product was very good too. Many thanks again.
Jo CrerarAndrew Murray
Click here to read impartial, anonymous reviews vetted by THE Trading Standards